This vignette describes the statistical model implemented by
fit_baygmst(), connecting the code to the underlying
statistics and to the literature it descends from. For a hands-on
walkthrough of the software, see
vignette("baygmst-intro", package = "BayGMST").
Background
Global mean surface temperature (GMST) is a fundamental state variable of Earth’s climate system and a central target of paleoclimate reconstruction efforts. Because direct instrumental measurements extend back only about 150 years, estimates of GMST over longer periods must be inferred from indirect observations preserved in paleoclimate archives: tree rings, glacier ice, corals and sclerosponges, lake and marine sediments, and historical documents (Mann et al., 1999; Moberg et al., 2005). A variety of statistical strategies have been developed to extract the climate signal contained in these “proxies” (Tingley et al., 2012; Smerdon and Pollack, 2016), whether the target is a spatial climate field (Smerdon et al., 2023) or an aggregated index such as GMST.
Intellectual ancestry
BayGMST’s inference framework builds directly on the work of Barboza et al. (2014, 2019) and Wang (2020), who utilized a reduced proxy Bayesian approach that leverages not only the climate proxy network, but also estimates of past forcings (e.g., greenhouse gas concentrations, solar, and volcanic activity), which are known to influence GMST. The model below is their hierarchical formulation; BayGMST packages it, with the implementation choices noted in this vignette.
The hierarchical model
The approach is based on computing a “reduced proxy”
,
an aggregate of the available paleoclimate proxy observations. Several
methods exist to do so, like principal component regression, partial
least squares, sliced inverse regression, or a simple composite (Barboza
et al., 2019); see reduce_proxies() for the methods
implemented here, and as_baygmst_proxy() for supplying a
reduced or composited series built elsewhere. This quantity is then
modeled as autoregressive and linearly dependent on the GMST, denoted
(subscript
refers to time in years CE).
The model’s data level:
where denotes the lag-1 autocorrelation of , the ’s are coefficients, and controls the amplitude of the unit-variance noise term .
The process level models
as autoregressive and linearly dependent on the climate forcings
(greenhouse gas concentrations),
(related to volcanic aerosol optical depth), and
(solar irradiance), already transformed as described below (see
transform_forcings()):
where denotes the lag-1 autocorrelation of , the ’s are constant coefficients, and governs the amplitude of . Gaussian white noise for both and provides good results (Wang, 2020). Here and .
Missing (pre-instrumental) temperatures are treated as parameters and estimated jointly with the model parameters, so the posterior yields both the reconstruction and its uncertainty.
Mapping to the code
| Notation | Stan parameter | R argument / role |
|---|---|---|
y (transformed parameter) |
instrumental_T (observed part), y_mis
(reconstructed part) |
|
z (data) |
proxy, see reduce_proxies() /
as_baygmst_proxy()
|
|
phi_R |
||
sigma_z |
||
alpha0, alpha1
|
||
phi_T |
||
sigma_y |
||
beta0, betaG, betaV,
betaS
|
||
G, V, S (data) |
forcing_G, forcing_V,
forcing_S
|
Note on naming: the Stan code calls the proxy-equation parameters
phi_R and sigma_z (“R” for “reduced proxy”,
matching this implementation’s single-series design); this vignette
writes them
and
for readability. They are the same quantities.
Priors
As specified in the Stan model’s model block (weakly
informative):
Because the data level estimates its own intercept
and slope
,
the proxy series does not need to be pre-calibrated to temperature
units; these priors do, however, assume
is on roughly unit scale (a standardized composite or a
temperature-anomaly-scale series). See
as_baygmst_proxy().
Forcing data
Per Barboza et al. (2019, section 2.3), the three external forcings used in this family of models are:
- Volcanic forcing (): zonal-mean stratospheric aerosol optical depth at 550 nm from the eVolv2k dataset (Toohey and Sigl, 2017), covering 500 BCE to 1900 CE, area-weighted and averaged to a global annual estimate.
- Solar forcing (): total solar irradiance from the SATIRE-H reconstruction (Vieira et al., 2011), decadal before 1940 CE and daily thereafter, interpolated to annual resolution.
-
Greenhouse-gas forcing
():
hemispheric-mean atmospheric CO2 mole fraction (ppm) at annual
resolution (Meinshausen et al., 2017), extended further back using
ice-core-based compilations such as the PMIP4-CMIP6
past1000forcing set (Jungclaus et al., 2017).
All these series measure perturbation to the top of the atmosphere
energy budget, and are thus expressed in
,
following the climate science convention. To effect the conversion from
the original units (aerosol optical depth for
;
mole fraction for
),
transform_forcings() implements
where co2_coef = 5.35 is the simplified CO2 radiative
forcing coefficient of Myhre et al. (1998), adopted throughout the IPCC
assessment reports; co2_c0 = 280 ppm is the standard
pre-industrial atmospheric CO2 reference concentration; and
vol_coef = 25 is the stratospheric aerosol optical
depth-to-forcing scaling factor (in
per unit optical depth) used in IPCC AR5, traced to the GISS ModelE
lineage of Hansen et al. (2005). Solar irradiance is simply centered on
its own mean,
.
These physically motivated formulations are a slight departure from the
transformations used by Barboza et al. (2014, 2019).
Modeling assumptions worth knowing
-
The instrumental period is treated as error-free.
In
baygmst.stan, the latent temperature state is set exactly equal to the raw instrumental values for observed years; there is no separate instrumental measurement-noise parameter. Keep this in mind when interpreting instrumental-period fit statistics fromsummary()on a fitted model. -
Cross-validation metrics are fully Bayesian.
cv_baygmst()reports the posterior mean of the Stan-computedr2_cv/mse_cvgenerated quantities, which is close to, but not identical to, a plug-in point-estimate computed from the posterior-mean reconstruction. -
Compositing uncertainty is not yet propagated. When
the proxy input comes from an ensemble (e.g. a composite ensemble
supplied via
as_baygmst_proxy()), the ensemble is collapsed to a single series before fitting in this release.
References
- Barboza, L., B. Li, M. P. Tingley, and F. G. Viens (2014), Reconstructing past temperatures from natural proxies and estimated climate forcings using short- and long-memory models, The Annals of Applied Statistics, 8(4), 1966-2001, doi:10.1214/14-AOAS785.
- Barboza, L. A., J. Emile-Geay, B. Li, and W. He (2019), Efficient reconstructions of common era climate via integrated nested Laplace approximations, Journal of Agricultural, Biological, and Environmental Statistics, 24(3), 535-554, doi:10.1007/s13253-019-00372-4.
- Hansen, J., et al. (2005), Efficacy of climate forcings, J. Geophys. Res. (Atm), 110(D9), 18104+, doi:10.1029/2005JD005776.
- Jungclaus, J. H., et al. (2017), The PMIP4 contribution to CMIP6, Part 3: The last millennium, scientific objective, and experimental design for the PMIP4 past1000 simulations, Geoscientific Model Development, 10(11), 4005-4033, doi:10.5194/gmd-10-4005-2017.
- Mann, M. E., R. S. Bradley, and M. K. Hughes (1999), Northern hemisphere temperatures during the past millennium: Inferences, uncertainties, and limitations, Geophysical Research Letters, 26(6), 759-762, doi:10.1029/1999GL900070.
- Meinshausen, M., et al. (2017), Historical greenhouse gas concentrations for climate modelling (CMIP6), Geoscientific Model Development, 10(5), 2057-2116, doi:10.5194/gmd-10-2057-2017.
- Moberg, A., D. M. Sonechkin, K. Holmgren, N. M. Datsenko, and W. Karlén (2005), Highly variable Northern Hemisphere temperatures reconstructed from low- and high-resolution proxy data, Nature, 433(7026), 613-617, doi:10.1038/nature03265.
- Myhre, G., E. J. Highwood, K. P. Shine, and F. Stordal (1998), New estimates of radiative forcing due to well mixed greenhouse gases, Geophysical Research Letters, 25(14), 2715-2718, doi:10.1029/98GL01908.
- Smerdon, J. E., and H. N. Pollack (2016), Reconstructing earth’s surface temperature over the past 2000 years: the science behind the headlines, WIREs Climate Change, 7(5), 746-771, doi:10.1002/wcc.418.
- Smerdon, J. E., E. R. Cook, and N. J. Steiger (2023), The historical development of large-scale paleoclimate field reconstructions over the common era, Reviews of Geophysics, 61(4), e2022RG000782, doi:10.1029/2022RG000782.
- Tingley, M. P., P. F. Craigmile, M. Haran, B. Li, E. Mannshardt, and B. Rajaratnam (2012), Piecing together the past: statistical insights into paleoclimatic reconstructions, Quaternary Science Reviews, 35, 1-22, doi:10.1016/j.quascirev.2012.01.012.
- Toohey, M., and M. Sigl (2017), Volcanic stratospheric sulfur injections and aerosol optical depth from 500 BCE to 1900 CE, Earth System Science Data, 9(2), 809-831, doi:10.5194/essd-9-809-2017.
- Vieira, L. E. A., S. K. Solanki, N. A. Krivova, and I. Usoskin (2011), Evolution of the solar irradiance during the Holocene, Astron. & Astrophys., 531, A6, doi:10.1051/0004-6361/201015843.
- Wang, H. (2020), Wiener-chaos analysis on Bayesian models with applications in agriculture and climatology, Ph.D. dissertation, Michigan State University, East Lansing, MI, doi:10.25335/vb7s-rh49.